Built for Outside
A UV-stable, slip-resistant surface that holds up through Texas summers, heavy rain, and thermal expansion.
What Goes Wrong
The product choice and surface prep determine whether a coating lasts one season or many years.
Standard epoxy is not UV-stable, it yellows and delaminates within one outdoor season in Fort Worth’s sun.
A polyaspartic or polyurea topcoat is specified for every exterior application, rated for direct UV exposure.
Coating applied without concrete grinding fails to bond, peeling at the edges within months of installation.
The installer grinds the slab to open the concrete pores before any primer or base coat is applied.
A smooth topcoat on a wet pool deck or patio becomes a slip hazard after the first rain.
Slip-resistant aggregate is broadcast into the topcoat on any surface where wet-foot traction is a safety concern.
Applying coating outside the correct temperature and humidity window causes bubbling, poor adhesion, and early failure.
The installer times the job around Fort Worth’s weather windows to ensure the coating bonds and cures correctly.
Surfaces We Cover
Pool decks, patios, walkways, and driveways each have different prep and topcoat requirements, the written estimate covers all of them.
UV-stable polyaspartic topcoat with slip-resistant aggregate broadcast for wet-foot safety around the water’s edge.
Two-coat system over existing concrete that handles thermal expansion and resists staining from outdoor furniture and grills.
Slip-resistant coating applied to foot-traffic paths, with crack repair and moisture assessment completed before the base coat.
Heavy-duty polyurea topcoat rated for vehicle traffic, UV exposure, and the oil and chemical spills common on driveways.
Filled and feathered before any coating is applied.
Slab moisture tested to prevent topcoat failure.
Broadcast type and density listed in the estimate.
Adhesion and sheen checked before sign-off.
Why Choose Us
Every job is backed by a written scope, an on-site assessment, and a final inspection, not just a verbal quote and a handshake.
The estimate lists surface prep, coating system, aggregate type, and layer count, nothing is left to assumption.
Every enquiry gets a physical inspection of the concrete before a price or timeline is confirmed.
Jobs are booked around Fort Worth’s temperature and humidity conditions to protect the cure and the bond.
Adhesion, sheen consistency, and aggregate coverage are checked before the installer leaves the site.
The on-site assessment and written estimate carry no commitment, you review the full scope before deciding.
How It Works
01
Submit your slab details and we arrange an on-site visit to inspect the concrete and note any cracks or moisture issues.
02
You receive a written estimate covering surface prep, coating system, aggregate spec, and the full layer count before committing.
03
The installer completes the work and runs a final inspection checking adhesion, sheen, and aggregate coverage before handover.
Tell us about your surface and we’ll arrange an on-site assessment with a written scope covering prep, materials, and coating layers.