Skip to content

Restore, Don’t Replace

Concrete Overlay in Fort Worth

Spalled and pitted slabs restored to a flat, coatable surface, no full tearout required.

  • On-Site Assessment
  • Written Estimate
  • Final Inspection
A tradesperson wearing spiked shoes walks on a freshly laid, glossy self-leveling floor, possibly epoxy or resin.

What Goes Wrong

Where concrete overlay jobs fail, and how to avoid it

Surface prep and overlay thickness are the two decisions that determine whether a bonded overlay lasts.

Skipped Profiling

Applying overlay to an unprofiled slab traps a weak boundary layer that causes delamination within months.

Grind First, Always

The installer grinds the slab to open the concrete pores before any overlay material is mixed or poured.

Unrepaired Spalls

Pouring overlay over deep spalls without patching them first creates voids that crack through the finished surface.

Patch Before Overlay

Delaminated areas and deep spalls are filled and cured before the overlay coat is applied across the slab.

Wrong Thickness

Overlay applied too thin over a rough surface bridges unevenly, leaving high spots that wear through quickly.

Specified Thickness

Overlay thickness, typically 3/16 to 3/8 inch, is set in the written estimate based on the actual surface condition.

Early Topcoat

Sealing or coating before the overlay reaches full cure traps moisture and causes the topcoat to lift or blister.

Confirmed Cure Time

The installer verifies full overlay cure before any sealer, stain, or epoxy topcoat is applied to the surface.

Scope of Work

What a concrete overlay covers

One system handles surface restoration across residential, commercial, and industrial slabs in Fort Worth.

Surface Grinding & Profiling

Opens concrete pores for a mechanical bond.

Spall & Crack Repair

Fills voids before the overlay is poured.

Overlay Application

3/16 to 3/8 inch polymer-modified coat.

Sealer & Coating Compatibility

Overlay finished for stain, seal, or epoxy.

How It Works

A concrete overlay fixes surface damage without tearing out the slab

Spalling, pitting, and surface scaling can be corrected with a bonded overlay when the structural slab is still sound.

Request an Estimate

Driveways, pool decks, and warehouse floors often show surface deterioration while the underlying slab remains structurally intact. Tearing out and replacing a sound slab is unnecessary and expensive. A polymer-modified overlay bonds to the existing concrete and restores a flat, workable surface.

The installer grinds and profiles the existing slab to open the surface for bonding. Delaminated areas and deep spalls are repaired before the overlay is mixed and applied. Overlay thickness is specified in the written estimate, typically between 3/16 inch and 3/8 inch depending on surface condition.

Once the overlay cures, it can be sealed, stained, or coated with an epoxy system. The installer confirms the overlay has reached full cure time before any topcoat is applied. Final inspection checks for edge adhesion, surface flatness, and compatibility with the planned finish system.

Why Choose Us

Why Fort Worth homeowners use our partners for concrete overlay

Every job is scoped in writing, assessed on-site, and signed off at completion, no guesswork at any stage.

Written Scope Before Any Work

The estimate lists prep plan, overlay thickness, and materials, agreed in writing before the installer starts.

On-Site Assessment Included

Every enquiry gets a no-obligation site visit so the installer can evaluate the actual slab condition.

Final Inspection & Sign-Off

Edge adhesion, surface flatness, and finish compatibility are checked and confirmed before the job closes.

Vetted Local Installers

We connect Fort Worth homeowners with independent local partners who carry the right tools and materials.

A modern, minimalist interior space with polished concrete floors, textured concrete walls, and large windows on the left overlooking a city, creating strong sunlight and shadows.
A tradesperson wearing spiked shoes walks on a freshly laid, glossy self-leveling floor, possibly epoxy or resin.

The Process

From first enquiry to finished floor in three steps

Request an Estimate

  1. 01

    Request Your Assessment

    Submit your enquiry and we arrange an on-site visit where the installer evaluates the slab and surface condition.

  2. 02

    Review Your Written Estimate

    You receive a written estimate covering prep method, overlay thickness, materials, and any planned topcoat system.

  3. 03

    Approve & Schedule Work

    Once you approve the scope, the installer schedules the job and completes a final inspection at handover.

Common Questions

Concrete overlay questions, answered plainly

  • Can an overlay fix my cracked driveway, or does the slab need to come out?

    If the slab is structurally sound and the cracks are surface-level, an overlay can work. The installer assesses the slab on-site and fills active cracks before applying the overlay. Full replacement is only needed when the base is heaving or the slab has lost structural integrity.

  • How thick does the overlay need to be?

    Overlay thickness typically runs between 3/16 inch and 3/8 inch. The installer sets the exact thickness in the written estimate based on how rough or pitted the existing surface is. Going too thin over a rough slab causes uneven wear.

  • What happens if I delay fixing spalled concrete?

    Surface spalling exposes the aggregate beneath, which absorbs water. In Fort Worth’s freeze-thaw cycles, that moisture expands and deepens the damage each season. A small spalled area can double in size within a year, eventually compromising the slab’s structural layer and requiring full replacement.

  • How long before I can walk or drive on the overlay?

    Light foot traffic is typically possible within 24 hours. Vehicle traffic requires the overlay to reach full cure, which usually takes 48 to 72 hours. The installer confirms the exact timeline based on the overlay product used and ambient temperature at the time of application.

  • Can the overlay be stained or coated after it cures?

    Yes. Once the overlay reaches full cure, it can accept a sealer, acid stain, or a full epoxy or polyaspartic topcoat system. The installer verifies cure before any topcoat is applied, skipping that check is the most common reason topcoats blister or peel.

  • Is a concrete overlay regulated or permitted in Fort Worth?

    A standard surface overlay on an existing slab does not typically require a building permit in Fort Worth. If the overlay is part of a larger structural repair or a new construction project, permit requirements may apply. The installer confirms any local requirements during the on-site assessment.

More questions about Concrete Overlay?

Get a Written Estimate for Your Floor

Tell us about your slab and we’ll arrange an on-site assessment with a written scope covering prep, materials, and coating layers.

Request an Estimate