Skip to content

Floor Design

Metallic Epoxy Flooring in Fort Worth

Turn a plain concrete slab into a permanent design feature with a marbled, three-dimensional finish.

  • Written Estimate First
  • On-Site Assessment
  • Final Inspection
A modern living room featuring a striking blue and white epoxy resin floor, dark grey walls, a black sectional sofa, and a tiled fireplace.

What Goes Wrong

Metallic epoxy fails when the process is rushed or the prep is skipped

The finish looks striking, which means every flaw in the slab or the application shows just as clearly.

Uneven Pigment Flow

If the slab is not ground flat, the metallic layer pools in low spots and produces a blotchy, uneven pattern.

Flat Slab, Even Coat

Concrete grinding levels the surface so the metallic pigment moves evenly across the entire floor during application.

Color Shift Over Time

A standard epoxy topcoat yellows under UV exposure, dulling the metallic finish within one to two years indoors near windows.

Polyaspartic Topcoat

A clear polyaspartic topcoat seals the metallic layer and resists UV-driven color shift, keeping the finish stable long-term.

Moisture Blowouts

Moisture vapor pushing through a Fort Worth slab causes bubbles and delamination in the metallic base coat after curing.

Vapor Assessment First

The installer tests moisture vapor emission before priming and applies a barrier coat where readings exceed safe thresholds.

Pattern Agreed Too Late

Choosing pigment color after mixing starts means the installer cannot replicate the result if the first attempt misses the mark.

Scope in Writing

The written estimate locks in the pigment color, base coat product, and topcoat spec before any material is opened or mixed.

Depth in the Floor

Metallic epoxy creates a one-of-a-kind floor from a plain slab

Metallic pigment suspended in epoxy moves during application, producing a marbled or flowing pattern that sets permanently as the coat cures.

Request an Estimate

Showrooms, salons, and residential living spaces often want a floor that reads as a design feature rather than a utility surface. Metallic epoxy achieves that without tile or stone. The installer mixes metallic mica pigment into the epoxy base coat and manipulates it with tools and airflow to create the pattern.

Surface prep is identical to any epoxy system: concrete grinding, crack repair, and moisture vapor assessment. The slab must be flat and clean for the metallic layer to move evenly. The written estimate specifies the pigment color, base coat product, and polyaspartic topcoat, so the finish is agreed before any mixing begins.

The polyaspartic topcoat seals the metallic layer and provides UV resistance to prevent color shift over time. Cure time is observed before foot traffic is allowed. The installer inspects the cured floor for pattern consistency, topcoat adhesion, and surface clarity before the job is signed off.

Why Choose Us

Why our partners for metallic epoxy in Fort Worth?

Every job is scoped in writing before it starts and inspected in person before it closes, no assumptions, no surprises.

Written Scope Before Any Work Starts

The estimate lists pigment color, prep plan, base coat, and topcoat spec, agreed and signed before the installer arrives.

On-Site Slab Assessment Included

Every enquiry gets a no-obligation visit so the installer can evaluate the concrete before quoting any price.

Final Inspection at Job Close

Pattern consistency, topcoat adhesion, and surface clarity are checked on-site before the job is signed off.

Vetted Local Installers

We connect customers with independent local partners who carry out metallic epoxy work in the Fort Worth area.

No Work Scheduled Without Agreement

The installer does not begin until the written estimate is reviewed and the full scope is confirmed by the customer.

A modern, minimalist interior space with polished concrete floors, textured concrete walls, and large windows on the left overlooking a city, creating strong sunlight and shadows.
A tradesperson wearing spiked shoes walks on a freshly laid, glossy self-leveling floor, possibly epoxy or resin.

The Process

From first enquiry to finished floor in three steps

Request an Estimate

  1. 01

    Submit Your Enquiry

    Tell us about your slab and we arrange an on-site assessment with a local installer at no obligation to you.

  2. 02

    Review the Written Estimate

    The installer delivers a written scope covering prep, pigment color, base coat product, and polyaspartic topcoat before scheduling.

  3. 03

    Inspect & Sign Off

    Once cured, the installer checks pattern consistency, adhesion, and surface clarity before the job is formally closed.

Common Questions

Questions about metallic epoxy flooring in Fort Worth

  • Can metallic epoxy be applied over any concrete slab?

    Most slabs qualify, but the installer checks for cracks, moisture vapor emission, and surface contamination first. Oil stains and high moisture readings require treatment before the base coat goes down. The on-site assessment identifies any issues before the estimate is written.

  • How long does the floor take to cure before I can walk on it?

    A polyaspartic topcoat typically allows light foot traffic within 24 hours. Full cure for vehicle or heavy use takes longer. The installer specifies the exact cure schedule in the written estimate based on the product used and the ambient slab temperature.

  • What happens if I delay getting cracks repaired before the coating?

    Cracks left unrepaired will telegraph through the metallic layer and widen under foot traffic, eventually breaking the coating bond. Repairing the coating over a moving crack costs more than fixing the crack before the first coat is applied.

  • Can I choose the color and pattern before work starts?

    Yes. The written estimate locks in the pigment color and base coat product before any material is mixed. The installer cannot replicate an exact pattern after the fact, so the color selection is confirmed in writing at the estimate stage.

  • Is metallic epoxy suitable for Fort Worth’s heat and humidity?

    High slab temperatures affect epoxy pot life and cure speed. The installer accounts for ambient conditions when scheduling the application window. The polyaspartic topcoat is specified partly because it performs better than standard epoxy in high-temperature environments.

  • How do I maintain a metallic epoxy floor after installation?

    Sweep or dust-mop regularly to remove grit that can scratch the topcoat. Clean spills with a pH-neutral cleaner. Avoid abrasive scrubbers. The polyaspartic topcoat is chemical-resistant, but prolonged contact with harsh solvents should be avoided.

More questions about Metallic Epoxy Flooring?

Get a Written Estimate for Your Floor

Tell us about your slab and we’ll arrange an on-site assessment with a written scope covering prep, materials, and coating layers.

Request an Estimate